Search Results for: C1020B111F
10 mm x 2 mm | 3 V | Coin Vibration Motor
The VC1020B001D flat coin vibration motor is similar to our VC1020B111F, but has no wires leads, no foam pad or double stick adhesive tape. The bare pads of the flex circuit are exposed. This will allow for connecting a custom FPC or a cable assembly. The size of these pads are too small to mate with PCB mounted springs / pogo pins. We can also customize this with an FPC of your design.
10 mm x 2.1 mm | 3 V | Coin Vibration Motor
Our VC1020B111F includes an optional 0.2 mm foam pad which helps alleviate unwanted mechanical between the motor and the surface directly above it. Poron rubber pads of varying thicknesses are available. This motor is also our most expensive 10mm diameter motor. We recommend using this coin vibration motor only if your design can not accommodate our 2.6, 3.0 or 3.4 mm thick 10mm motors. The price of our 2.6, 3.0 and 3.4 mm thick coin motor are all the same. This motor is only available with wire leads or we can add a wire-to-board connector to the end of the leads. Click here for details. Other connectors are available upon request. This motor is supplied with a self adhesive tape which can be used to secure the motor to your PCB or the inner wall of your products housing.
10 mm x 2.1 mm | 3 V | Connector | Coin Vibration Motor
Our VC1020B327F coin vibration motor is the connectorized version of our popular VC1020B111F. It uses of the ACES 50270-002H0H0-001 which is based on the popular Molex 78172-0002 series connector. We favor ACES brand connectors due to their short lead times, quality and price. Contact them directly, or one of their distributors, for the mating PCB side of this connector. This motor has the optional 0.2 mm foam pad which helps alleviate unwanted mechanical between the motor and the surface directly above it. Poron rubber pads of varying thicknesses are available. This motor is also our most expensive 10mm diameter motor. We recommend using this coin vibration motor only if your design can not accommodate our 2.6, 3.0 or 3.4 mm thick 10mm motors. The price of our 2.6, 3.0 and 3.4 mm thick coin motor are all the same. This motor is also available with different connectors as well. Click here for details. Other connectors are available upon request. Supplied with a self adhesive tape which can be used to secure the motor to your PCB or the inner wall of your products housing.
10 mm x 2.1 mm | 3 V | Coin Vibration Motor
The VC1020B569L coin vibration motor is based on the popular leaded version of this same motor, the VC1020B111F. It may be connected to another FPC or by PCB mounted spring contacts. Custom FPC's based on your design are available.
10 mm x 2.7 mm | 3 V | Connector | Coin Vibration Motor
Our VC1027B902F coin vibration motor is the connectorized version of our popular VC1026B002F. It uses of the ACES 50270-002H0H0-001 which is based on the popular Molex 78172-0002 series connector. We favor ACES brand connectors due to their short lead times, quality and price. Contact them directly, or one of their distributors, for the mating PCB side of this connector. If required, Poron rubber pads of varying thicknesses be be added on request. Supplied with a self adhesive tape which can be used to secure the motor to your PCB or the inner wall of your products housing. available. Other connectors or special lead lengths are available upon request. Click here for details.
10 mm x 2.7 mm | 3 V | Connector | Coin Vibration Motor
Our VC1027B923F coin vibration motor is the connectorized version of our popular VC1026B002F. It uses of the ACES 50276-002H0H0-001 which is based on the popular Molex 51021-0200 series connector. We favor ACES brand connectors due to their short lead times, quality and price. Contact them directly, or one of their distributors, for the mating PCB side of this connector. If required, Poron rubber pads of varying thicknesses be be added on request. Supplied with a self adhesive tape which can be used to secure the motor to your PCB or the inner wall of your products housing. available. Other connectors or special lead lengths are available upon request. Click here for details.
10 mm x 2 mm | 3 V | Low Current | Coin Vibration Motor
This motor is designed to consume approx. 50% less power and current than our equivalently sized VC1020B111F. G force and RPM is somewhat lower than the VC1020B111F. This motor is only available with wire leads. At your request, we can add a connector to the end of the leads. Click here for details. Other connectors are available upon request. This motor is supplied with a self adhesive tape which can be used to secure the motor to your PCB or the inner wall of your products housing.
