Jinlong Machinery & Electronics
Micro Motors - Photo 1

Micro Motors

Micro Motors - Photo 2
Our DC micro motors are low cost and light weight. They utilize precious metal brushes that provide commutation. There coreless design provides high acceleration with minimal power consumption. Our micro motors are typically used in applications such as drones, fans, electronic locks and any other micro-mechanical assemblies that require a drive motor. The shaft of our DC micro motors can be fitted with propeller / impeller blades, pinion gears or gear heads (please note that we not not manufacture these).

We can also supply our DC micro motors with rubber gaskets, PCB mounting brackets, spring contacts or with SMD reflow pads. All possible mounting configurations are pictured in the drawings at the bottom of this page. Custom lead lengths and connectors are also available for large orders.

3-D CAD files in IGS or STP formats are available.

Scroll Table To See All Content


Part Number

Download PDF
Image

motor logo
Motor Size Shaft Voltage No Load At Maximum Efficiency Stall
Torque Torque
Dia (mm) Body (mm) Overall (mm) Length (mm) Dia. (mm) Range (VDC) Nominal (VDC) Speed (RPM) Current (ma) Speed (RPM) Current (ma) g.cm mN.m Power (mw) g.cm mN.m Current (ma)
Q7AL2BX180003 Q7AL2BX180003 Micro Motor 7.0 16.5 20.4 3.9 1.0 2.2~3.6 3.0 18360 16.5 15647 95.2 1.13 .111 182 7.66 .751 548.8
Z7AL2A0000001 Z7AL2A0000001 Micro Motor 7.0 16.6 21.4 4.8 1.0 0.9~1.6 1.3 8600 12.1 6647 41.2 .33 .032 22 1.43 .140 140.1
Q6SL2BQ180002 Q6SL2BQ180002 Micro Motor 6.0 10.0 13.7 3.7 0.8 2.2~3.6 3.0 18900 13.7 13392 33.3 .23 .023 32 .80 .078 81.0
Q6DL2AQ140001 Q6DL2AQ140001 Micro Motor 6.0 12.0 16.0 4.0 0.8 0.9~1.6 1.3 14917 16.9 10832 44.9 .17 .017 29 .61 .059 118.9
Q4KL2BQ280001 Q4KL2BQ280001 Micro Motor 4.0 11.0 15.2 4.2 0.7 2.2~3.6 3.0 28330 14.3 19768 33.0 .14 .014 30 .48 .047 76.2
Q4SL2BQ280001 Q4SL2BQ280001 Micro Motor 4.0 10.0 13.8 3.8 0.7 2.2~3.6 3.0 27660 17.2 18799 36.5 .15 .015 28 .45 .044 77.4
Q4TL2BQ360003 Q4TL2BQ360003 Micro Motor 4.0 8.0 12.0 4.0 0.6 2.2~3.6 3.0 37650 18.2 25595 38.6 .11 .011 30 .35 .034 82.0
Q4TL2BQ380001 Q4TL2BQ380001 Micro Motor 4.0 8.0 12.0 4.0 0.6 2.2~3.6 3.0 39050 31.6 24927 55.8 .11 .011 29 .31 .030 98.5
Q4SL2AQ210005 Q4SL2AQ210005 Micro Motor 4.0 10.0 14.5 4.5 0.7 1.1~1.6 1.3 22575 17.8 15808 41.6 .09 .009 14 .30 .029 97.1
Z4SL2A0000003 Z4SL2A0000003 Micro Motor 4.0 10.0 13.8 3.8 0.7 1.1~1.6 1.3 20760 23.8 13896 48.2 .09 .009 13 .27 .026 97.6
Q4TL2BQ230001 Q4TL2BQ230001 Micro Motor 4.0 8.0 12.0 4.0 0.6 2.2~3.6 3.0 22067 9.2 14363 17.2 .07 .007 10 .20 .019 32.0

NOTE 1) CUSTOM SHAFT LENGTHS ARE AVAILABLE FOR LARGE ORDERS
NOTE 2) CUSTOM RPM SPEED ARE AVAILABLE FOR LARGE ORDERS
NOTE 3) CUSTOM LEAD LENGTHS AND CONNECTORS ARE AVAILABLE FOR LARGE ORDERS

 

Mounting Configurations of DC Micro Motors

 Config 1 WIRE LEAD TYPE  Config 1.1 WIRE LEAD w. CONNECTOR

Micro Motors - WIRE LEAD TYPE 

Micro Motors - WIRE LEAD w. CONNECTOR

We can supply this motor with a variety of
different connectors

 Config 1.2 SOLDER TERMINALS

Micro Motors - SOLDER TERMINALS

 Config 2 WIRE LEAD W. PCB BRACKET  Config 3 WIRE LEAD W. PCB BRACKET

Micro Motors - WIRE LEAD W. PCB BRACKET

Micro Motors - WIRE LEAD W. PCB BRACKET

 Config 4 THOUGH-HOLE PCB MOUNTED  Config 5 COMPRESSION SPRING MOUNT

Micro Motors - THOUGH-HOLE PCB MOUNTED

Micro Motors - COMPRESSION SPRING MOUNT

 Config 6 COMPRESSION SPRING MOUNT

Micro Motors - COMPRESSION SPRING MOUNT

 Config 8 LIGHT BULB STYLE REAR CONTACT  Config 9  SURFACE MOUNT TYPE
( reflow solderable )

Micro Motors - LIGHT BULB STYLE REAR CONTACT

Micro Motors - SURFACE MOUNT TYPE

 Config 10  SURFACE MOUNT TYPE
( reflow solderable )
 Config 11  WIRE LEAD WITH RUBBER
GASKET ( RUBBER BOOT )

Micro Motors - SURFACE MOUNT TYPE

Micro Motors - WIRE LEAD WITH RUBBER GASKET

 Config 12 FLEXIBLE CIRCUIT (FPC)

Micro Motors - FLEXIBLE CIRCUIT (FPC)

Top