Jinlong Machinery & Electronics
Model Number: C0720B001F

7mm x 2.0mm | 3 V | Coin Vibration Motor

Measuring only 7 mm x 2 mm the C0720B001 is one of the smallest coin vibration motors available.   The contact lands on this ERM coin motor are small and the use of  pogo pings or PCB spring contacts will be difficult.  It is recommended that this FPC be connected directly to a PCB or another FPC via a " hot bar soldering" machine.  It was specifically designed for wearable devices and has won wide acceptance by major industry players in the fitness tracker and medical device markets. As this motor is relatively expensive, we recommend you use this motor only if your design cannot utilize one of our lower priced 8mm or 10mm diameter coin vibration motors. If purchased in minimum lots of 10K pcs we can supply it with a custom FPC (flexible printed circuit). If you require adhesive on the rear of this vibration motor, we can supply it with 3M 467 which will add 0.05 mm to the overall thickness of the motor. Order part number C0720B013F if you need this adhesive.

Summary Of Specifications
Technology Type: BRUSH
Diameter (mm): 7.0
Thickness (mm): 2.1
Rated Voltage (Vdc): 3.0
Operating Voltage (Vdc): 2.7~3.3
Rated Current MAX (mA): 80
Typical Current (mA): 48
Rise Time (ms) MAX *: 90
Fall Time (ms) MAX *: 50
Rated Speed (rpm): 10000
Vibration Force (G): 0.50
* at 50% of Maximum G force
C0720B001F Coin Vibration Motor Mechanical Drawing

This part is not authorized for Life Supporting Devices
None of the products offered for sale by us are authorized for use in any device that:

  1. is surgically implanted into the body
  2. supports or sustains life, and whose failure to perform as per our specification,
    may result in serious injury or death of the user.

C0720B001F Coin Vibration Motor, rated-current_revolving-speedC0720B001F Coin Vibration Motor 01C0720B001F Coin Vibration Motor 02C0720B001F Coin Vibration Motor 03C0720B001F Coin Vibration Motor 04C0720B001F Coin Vibration Motor 05