This LRA is designed to operate at maximum efficiency and G force when driven with a 200 hz signal. It will operate above and below this frequency, but will generate less G force. It can be used for a variety of haptic feedback applications. This part is typically connected to a LRA driver IC which produces the AC drive signal for this device. For further information about this see the BOTTOM of this page. For orders of 1K pcs+, it can be ordered with or without tape / foam. Custom lead lengths and FPC's are available as well.
| Summary Of Specifications | |
| Length (mm): | 12.0 |
| Width (mm): | 6.0 |
| Height (mm): | 2.8 |
| Rated Voltage (AC RMS): | 2.0 |
| Operating Voltage (AC RMS): | 1.0 ～ 2.05 |
| Rated Current MAX (mA): | 130 |
| Typical Current (mA): | 105 |
| Rise Time (ms) MAX *: | 40 |
| Fall Time (ms) MAX *: | 60 |
| Resonant Frequency: | 200 |
| Vibration Force (Grms): | 1.80 |
| * at 50% of Maximum G force | |
| Packaging Spec | |
| Part Packaging: | Plastic Tray |
| Qty per reel / tray: | 100 |
| Quantity - Master box: | 4000 |
| Size - Master Box: | 35*21*21.7CM |
| Weight - Master Box: | 12KG |
| ECCN: | EAR99 |
| USA HTS TARIFF: | 8501.10.4020 |
| 25% Exclusion Code: | 9903.88.67 |
| 25% Ex. Code Valid: | thru May 31 2024 |
Available from
QTY In Stock: 510 pcs Contact Us for quotes on 2K+ pcs |
|||
|
This part is not authorized for Life Supporting Devices
None of the products offered for sale by us are authorized for use in any device that:
