Jinlong Machinery & Electronics
Model Number: C0830B009L
C0830B009L

8mm x 3.0mm | 3 V | Coin Vibration Motor

This coin vibration motor has an FPC with large contact pads that typically connect with PCBA mounted pogo pins / spring contacts on the PCBA. The coin vibrator motor is mounted against the inner wall of the product housing. The rear of this motor has 3M 467 double stick tape to facilitate mounting. If the FPC size or contact arrangement is not suitable for your application we can fabricate a custom flexible circuit as per your design. Tooling fees may apply.

Summary Of Specifications
Technology Type: BRUSH
Diameter (mm): 8.0
Thickness (mm): 3.0
Rated Voltage (Vdc): 3.0
Operating Voltage (Vdc): 2.5~3.5
Rated Current MAX (mA): 85
Typical Current (mA): 50
Rise Time (ms) MAX *: 90
Fall Time (ms) MAX *: 50
Rated Speed (rpm): 10000
Vibration Force (G): 0.80
* at 50% of Maximum G force
C0830B009L 3V Coin Vibration Motor Mechanical Drawing

This part is not authorized for Life Supporting Devices
None of the products offered for sale by us are authorized for use in any device that:

  1. is surgically implanted into the body
  2. supports or sustains life, and whose failure to perform as per our specification,
    may result in serious injury or death of the user.

C0830B009L 3V Coin Vibration Motor 03C0830B009L 3V Coin Vibration Motor 04C0830B009L 3V Coin Vibration Motor 05C0830B009L 3V Coin Vibration Motor 06C0830B009L 3V Coin Vibration Motor 07C0830B009L 3V Coin Vibration Motor 08

Top