Our VC1027B001D is identical to our VC1026B002F, except that it has no wire leads. This coin motor has soldering pads that will allow you to connect your own cable assembly or flex circuit. We recommend you coat the solder connection to this motor with an epoxy or suitable glue. This will insulate the connection as well as provide mechanical stability when the motor is vibrating. We currently use Loctite 326 on our production line for this purpose. The size of these pads are too small to mate with PCB mounted springs / pogo pins. We can also customize this with an FPC of your design. Please inquire for details.
CLICK HERE to see photos of how coin motors have been mounted in products.
| Summary Of Specifications | |
| Technology Type: | BRUSH |
| Diameter (mm): | 10.0 |
| Thickness (mm): | 2.7 |
| Rated Voltage (Vdc): | 3.0 |
| Operating Voltage (Vdc): | 2.5~3.5 |
| Rated Current MAX (mA): | 90 |
| Typical Current (mA): | 50 |
| Rise Time (ms) MAX *: | 90 |
| Fall Time (ms) MAX *: | 50 |
| Rated Speed (rpm): | 10000 MIN |
| Vibration Force (Grms): | 0.80 |
| * at 50% of Maximum G force | |
| Packaging Spec | |
| Part Packaging: | Plastic Tray |
| Qty per reel / tray: | 100 |
| Quantity - Master box: | 4000 |
| Size - Master Box: | 45x28x20CM |
| Weight - Master Box: | 6.6KG |
| ECCN: | EAR99 |
| USA HTS TARIFF: | 8501.10.4060 |
| 25% Exclusion Code: | 9903.88.67 |
| 25% Ex. Code Valid: | thru May 31 2024 |
|
If you need samples, please Contact Us. |
|||
|
This part is not authorized for Life Supporting Devices
None of the products offered for sale by us are authorized for use in any device that:
