KOLT
Jinlong Machinery & Electronics

Image of Jinlong Machinery 24 mm ERM Vibrating MotorMicro MotorsImage of Jinlong Machinery 24 mm ERM Vibrating Motor

 

Our DC micro motors are low cost and light weight. They utilize precious metal brushes that provide commutation. There coreless design provides high acceleration with minimal power consumption. Our micro motors are typically used in applications such as drones, fans, electronic locks and any other micro-mechanical assemblies that require a drive motor. The shaft of our DC micro motors can be fitted with propeller / impeller blades, pinion gears or gear heads (please note that we not not manufacture these).  

 

 

 

We can also supply our DC micro motors with rubber gaskets, PCB mounting brackets, spring contacts or with SMD reflow pads. All possible mounting configurations are pictured in the drawings at the bottom of this page. Custom lead lengths and connectors are also available for large orders.
 

 

3-D CAD files in IGS or STP formats are available.  

CLICK  on  any  column  header  to  sort  by  that  column
CLICK  on  part number  in left column to view Drawing & Specification Sheet


Part Number

& Data Sheet Download

Motor Size Shaft Voltage No Load At Maximum Efficiency Stall
                      Torque   Torque  
Dia
(mm)
Body (mm) Overall (mm) Length (mm) Dia. (mm) Range (VDC) Nominal
(VDC)
Speed (RPM) Current (ma) Speed (RPM) Current (ma) g.cm mN.m Power (mw) g.cm mN.m Current (ma)

Q4TL2BQ230001

4.0 8.0 12.0 4.0 0.6 2.2~3.6 3.0 22067 9.2 11033 20.6 .10 .009 20.6 .20 .019 32.0

Z4SL2A0000003

4.0 10.0 13.8 3.8 0.7 1.1~1.6 1.3 20760 23.8 10380 60.7 .14 .013 60.7 .27 .026 97.6

Q4SL2AQ210005

4.0 10.0 14.5 4.5 0.7 1.1~1.6 1.3 22575 17.8 11288 57.5 .15 .014 57.5 .30 .029 97.1

Q4TL2BQ380001

4.0 8.0 12.0 4.0 0.6 2.2~3.6 3.0 39050 31.6 19525 65.0 .15 .014 65.0 .31 .030 98.5

Q4TL2BQ360003

4.0 8.0 12.0 4.0 0.6 2.2~3.6 3.0 37650 18.2 18825 50.1 .18 .017 50.1 .35 .034 82.0

Q4SL2BQ280001

4.0 10.0 13.8 3.8 0.7 2.2~3.6 3.0 27660 17.2 13830 47.3 .23 .022 47.3 .45 .044 77.4

Q4KL2BQ280001

4.0 11.0 15.2 4.2 0.7 2.2~3.6 3.0 28330 14.3 14165 45.3 .24 .023 45.3 .48 .047 76.2

Q6DL2AQ140001

6.0 12.0 16.0 4.0 0.8 0.9~1.6 1.3 14917 16.9 7458 67.9 .31 .030 67.9 .61 .059 118.9

Q6SL2BQ180002

6.0 10.0 13.7 3.7 0.8 2.2~3.6 3.0 18900 13.7 9450 47.3 .40 .039 47.3 .80 .078 81.0

Z7AL2A0000001

7.0 16.6 21.4 4.8 1.0 0.9~1.6 1.3 8600 12.1 4300 76.1 .72 .070 76.1 1.43 .140 140.1

Q7AL2BX180003

7.0 16.5 20.4 3.9 1.0 2.2~3.6 3.0 18360 16.5 9180 282.6 3.83 .375 282.6 7.66 .751 548.8

NOTE 1) CUSTOM SHAFT LENGTHS ARE AVAILABLE FOR LARGE ORDERS
NOTE 2) CUSTOM RPM SPEED ARE AVAILABLE FOR LARGE ORDERS
NOTE 3) CUSTOM LEAD LENGTHS AND CONNECTORS ARE AVAILABLE FOR LARGE ORDERS

Mounting Configurations of DC Micro Motors

 Config 1  WIRE LEAD TYPE  Config 1.1  WIRE LEAD w. CONNECTOR

 

We can supply this motor with a variety of
different connectors

 Config 1.2  SOLDER TERMINALS

 Config 2  WIRE LEAD W. PCB BRACKET  Config 3  WIRE LEAD W. PCB BRACKET

 Config 4  THOUGH-HOLE PCB MOUNTED  Config 5  COMPRESSION SPRING MOUNT

 Config 6  COMPRESSION SPRING MOUNT

 Config 8  LIGHT BULB STYLE REAR CONTACT  Config 9  SURFACE MOUNT TYPE
( reflow solderable )

 Config 10  SURFACE MOUNT TYPE
( reflow solderable )
 Config 11  WIRE LEAD WITH RUBBER
GASKET ( RUBBER BOOT )

 Config 12  FLEXIBLE CIRCUIT (FPC)