10 mm x 2.7 mm | 3 V | Coin Vibration Motor

Our VC1027B001D is identical to our VC1026B002F, except that it has no wire leads. This coin motor has soldering pads that will allow you to connect your own cable assembly or flex circuit. We recommend you coat the solder connection to this motor with an epoxy or suitable glue. This will insulate the connection as well as provide mechanical stability when the motor is vibrating. We currently use Loctite 326 on our production line for this purpose. The size of these pads are too small to mate with PCB mounted springs / pogo pins.  We can also customize this with an FPC of your design.   Please inquire for details.